Filter
Top Products
Read these instructions completely and carefully.
Remove Packaging and Parts
Parts provided:
■ 4 Wood screws
Place carton on a flat surface.
Open one end of the carton and lift off
the top piece.
Lift the warming drawer up and out of
the carton.
Place the drawer on top of the shipping
carton to protect the drawer front and the
finished flooring.
Remove all packing materials and tape.
Locate package containing 4 wood screws
and set aside.
Installation Below a Countertop
■ When installed, the front face of the warming
drawer will be nearly flush with cabinetry doors
or drawer fronts.
■ Drawer overlaps will conceal cut edges on all
sides of the opening.
The rough opening for the drawer must be:
—Depth:
23
1
⁄2″ minimum from inside back to
front of cabinet frame.
—Width:
25
1
⁄2″ for 27″ wide models
28
1
⁄2″ for 30″ wide models.
—Height:
9
1
⁄4″
■ 5″minimum above floor or 1″above toekick.
23
1
⁄4″ from floor to bottom of cutout is
recommended for under countertop
installation.
NOTE:
If you are installing in frameless cabinets,
it may be necessary to install 1/2″ wide cleats to
accept drawer mounting screws. See drawer to
find exact locations of mounting screws.
When installed under a cooktop:
Warming drawers are suitable for installation
below only certain specified cooktop models.
See the label attached to the top of the
warming drawer for suitable models.
Electrical
outlet 16″
max. from
left side
Electrical outlet 42″
max. from right side
1
1
⁄2″ Cabinet top
2″ Min.*
25″
9″
7″
9
1
⁄4″
23
1
⁄2″ Min.
36″
Countertop
height
A
Dimension A
27
″
Drawer 30
″
Drawer
25
1
⁄
2
″
28
1
⁄
2
″
Electrical outlet
flush with side of
cabinet 7″ max.
Install 2x4 or 2x2
anti-tip block
against rear
cabinet wall 9”
from floor to
bottom of block
* NOTE: When installing warming drawer with
a cooktop allow a 2
″
minimum from bottom of a
cooktop burner box to top of cutout.
13
Safety Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Customer Service