GE JTD910SBSS Food Warmer User Manual


 
17
Safety Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Customer Service
Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the chart on this page
first and you may not need to call for service.
Problem Possible Causes What To Do
Warming drawer
A fuse in your home may Replace the fuse or reset the circuit breaker.
will not work
be blown or the circuit
breaker tripped.
Warming drawer not Plug in.
plugged in.
Controls improperly set. See the
Using the warming drawer
section.
Drawer does not
Ball bearings out Fully extend the drawer and push it all the way in.
slide smoothly
of alignment. See the
Care and cleaning
section.
or drags
Drawer over-loaded or Reduce weight to less than 50 pounds. Redistribute
load unbalanced. drawer contents.
Excessive
Liquid in warming Remove liquid.
condensation
drawer pan.
Uncovered foods. Cover food with lid or aluminum foil.
Temperature setting Reduce temperature setting.
too high.
Incorrect Moisture Set the Moisture Selector to the open vent setting to
Selector setting. allow venting.
No heat in the
Room temperature Turn the knob to
LOW
then back to
PROOF.
PROOF setting
may prevent the
thermostat from
tripping on.
Food dries out
Moisture escaping. Cover food with lid or aluminum foil.