GE JTP55 Oven User Manual


 
JW
to Set the Oven When Using the Temperature Probe
The display
will
flash “PROBE” and the oven
control will signal if the probe is inserted into
the outlet, but the oven is not programmed for
the probe.
Your double oven has controls for the upper oven
and the lower oven. Be sure to set the correct
control. Pads on the left side of the panel are for
the upper oven. Pads on the right side of the panel
are for the lower oven. The TIMER ON/OFF,
COOK TIME, STOP TIME, INCREASE and
DECREASE pads can be used for either oven.
1.
Insert the probe
into
the
meat.
2. Plug
[he
probe
into the outlet
in
the
oven.
hlake sure it’s
pushed
all
the
way
in.
Close
the oven door.
~
3.
Press the PROBE
pad,
PROBE
lPPER
OVEN
A
A
4. Press the INCREASE or DECREASE
pad until the desired internal probe
@
temperature is displayed.
c
BAKE
A
5.
Press the BAKE pad.
6. Press the INCREASE
or
DECREASE pad. The
last oven set temperature appears in the display.
Continue pressing until the desired oven
temperature is displayed.
The oven will start automatically. The words
“BAKE ON” and the roasting temperature
yOLI
set
will
be in the display.
After a few seconds, the words “LO PROBE”
will
replace the roasting temperature in the display.
After the internal temperature of the meat reaches
100°F..
the changing internal temperature
will
be
shown in the display.
o
7. When the internal temperature
of
the
CLEAR
meat reaches the number you have
OFF
set, the probe and the oven turn off
and the oven control signals. To
slop
the signal, press the
CLEAWOFF
pad. Use hot pads to remove the probe
from the food. Do not use tongs to
pull on it–they might damage it.
CAUTION:
To prevent possible burns, do not
unplug
the probe from the outlet until the oven has
cooled. Do not store the probe in the oven.
NOTE:
If the probe is removed from the food before the
final temperature is reached, a tone will sound and
the display will
flash
until the probe is removed
from the oven.
A fan may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned
off.
You can use the timer even though you cannot use
timed oven operations.
To
change
the oven
temperature during
the
Roast cycle,
press the BAKE pad and then
the INCREASE or DECREASE pad to get the
new
temperature.
25