Filter
Top Products
Time Cook I &II allows you to
microwave for a preset amount of
time using automatic power levels
10
@igh),
or change power level
automatically.
Power level 10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See the cookbook.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1:
Fill a cup 2/3 full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close door.
I
Step 2:
Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10~’
“ENTER COOK
~E
I“ flashes.
Step 3: Select your cooking time.
Touch 1 and
MIN pad for a cooking
time of one minute. Display shows
“1:00”
and “POWER
10~’
“COOK
TIME I“ flashes.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see “How to
Change Power Level” at right.)
Step 4: Touch START pad.
“COOK TIME
1;’
“POWER 10”
and time, counting down, show
on the display.
Step
5: When time is up, the oven
signals and display flashes
“End~’
Oven, light and fan shut off.
Step 6: Open the door.
UsiW
the
~me
Cook II
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here’s how to do it.
Step 1:
Place food in oven in
microwave-safe container and close
the door.
[yJ:p
I &II..!;:
::
...=5
Step 2:
Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10?’
“ENTER COOK
T~E
I“ flashes.
Step 3: Select your cooking time.
For example, touch 2, 1 and 5 for a
cooking time of two minutes and 15
seconds. Display shows
“2:15”
and
“POWER
10?’
“COOK TIME I“
flashes.
Step 4:
Touch TIME COOK I & II.
How to
Chmge
Power
hvel
After setting cooking time,
touch the POWER LEVEL
pad, then touch desired
number for new power level.
Step 7: “COOK TIME
11’
“POWER 10” and time, counting
down, show on display.
Step 8:
At the end of the
first
programmed cook time, the second
power level,
“COOK TIME II”
and the second programmed cook
time, counting down, show on the
display.
Step 9:
When time is up, the oven
signals and display flashes
“End?’
The oven, light and fan shut off.
Step 10: Open the door.
Cook ‘N
Wakh
The Cook ‘N Watch feature is a
short-term cooking program which
automatically turns the oven off
after 3 minutes. It’s ideal for
melting cheese on food or other
quick cooking operations where
you want to stop cooking at just
the right time.
To Use Cook ‘N Watch
~
[—$,.~
COOK’
..:.,,.-=,:
WATCH
,
‘~-;,;,~.:,
Step 1:
Touch COOK ‘N
WA~H
pad. After 4 seconds, “START”
flashes on the display.
Step 2:
Touch START pad. “COOK
‘N
WA~H”
and time, counting up
to 3 minutes, show on display.
Power level 10 is automatically set
in oven but another
power
level can
be selected, either during
programming or during cooking.
Step
5: Set your cooking time.
D::.
~~~A~ .
.
~
::;,:..
‘~=.
‘~,.
Step
6: Touch START pad.
10
Step 3:
Open the door or touch the
CLEAR/OFF pad to stop cooking.
The oven will automatically signal,
flash “End” and shut off at the end
of 3 minutes.