GE JVM152J Microwave Oven User Manual


 
Automatic Cooting
The Auto Cook feature eliminates
your need to lookup cooking times
in the cookbook or guess how long
to set cooking time.
By actually
sensing the steam that escapes as
food microwaves, this feature
automatically
adjusk
the oven’s
cooking time to various types and
amounts of food.
Because most cooking containers
must be covered during automatic
cooking, this feature is best with
foods you want to steam or retain
moisture.
=
Foods Recommended
A wide variety of foods, including
meats, fish casseroles, vegetables,
leftovers and convenience foods,
can be Auto Cooked.
Foods Not Recommended
Foods that must be cooked uncovered,
foods that require constant attention,
foods that require addition of
ingredients during cooking and
foods calling for a dry look or crisp
surface after cooking should not be
Auto Cooked. It is best to Time
Cook these foods.
Foods that microwave best using
the temperature probe should be
Temp
Cooked or Auto Roasted.
Easy to Use
Simply touch three control
pads—
AU~
COOK, desired CODE and
START. The word
“AU~”
appears
on the display and the sensor is
activated to sense steam from food.
Keep Door Closed
Do not open the oven door while
the word
“AU~”
is
displayed—
steam escaping from the oven can
affect cooking performance. If the
door is opened, close the door and
touch the START pad immediately.
Automatic Cooking Codes
Automatic cooking codes 1 through
8 are designed to give you easy,
automatic results with a number
of foods.
Code 1, designed for reheating
foods quickly, turns the oven off
automatically as soon as the sensor
detects steam from the foods.
When codes 2 through 8 are
selected, the oven determines how
much additional cooking time is
needed after steam has been sensed,
automatically switches to TIME
COOK and signals. The word
“AUTO” on the display is then
replaced by cooking time, counting
down. When the signal is heard,
the oven door may be opened for
stirring, turning or rotating food.
A guide behind the oven door lists
cooking codes for
frequendy
prepared
fresh or uncooked foods and
appropriate codes are recommended
in the recipes and Automatic
Cooking Control Guide on pages
22 and 23.
19
Example:
AUT
<
AUTO ‘::
,.
COOK
‘:’’:’’
-----
R!
g
~,:
Place covered food in oven. Touch
the AUTO COOK pad. “ENTER
COOK CODE” flashes on the
display.
m
...E
Touch number pad for desired code.
“CODE 2“ appears on the display.
After 4 seconds, “START” flashes
on the display. Touch the START
pad.
The word “AUTO” appears on the
display, indicating steam sensor is
activated. DO
N~
OPEN DOOR.
OPENING DOOR MAY
AFFE~
COOKING PERFORMANCE.
Beep sounds when steam is sensed
and “AUTO” is replaced by cooking
time counting down. Rotate or stir
food, if necessary. Close door and
touch START pad to finish cooking.
When done, oven beeps every
minute until the door is opened or
the CLEAR/OFF pad is touched.