Filter
Top Products
Installation Instructions
TURN ON THE WATER SUPPLY
Turn the water on at the shutoff valve (house water
supply) and check for any leaks.
12
PLUG IN THE REFRIGERATOR
See the grounding information attached to the power
cord.
13
33
LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
2) Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
CAUTION: To avoid possible
personal injury or property damage,
the leveling legs must be firmly touching
the floor.
14
A
Flat-Head Screwdriver
LEVEL THE REFRIGERATOR DOORS
Remember a level refrigerator is necessary for
getting the doors perfectly even. If you need help,
review the previous section on leveling the
refrigerator.
If you open the freezer door, you can see
the center hinge.
Insert the supplied 4 mm Allen wrench into
the shaft of the center hinge.
Adjust the height by turning clockwise
or counterclockwise. When you turn
counterclockwise, the door will move up.
After adjusting the doors, insert the supplied
fastener ring using a pair of pliers in the gap
between the hinge grommet and the center
hinge. The number of fastener rings you will
need to insert depends on the gap.
NOTE: Four fastener rings are enclosed with
the refrigerator. Thickness of each fastener ring
is 0.04”.
15
A
B
When
the left
door is
lower than
the right
door.
When
the left door
is higher
than
the right
door.
Adjustment
point
Adjustment
point
D
C