GE Profile 26 and 29 Refrigerator User Manual


 
4
About the 7 control panel for LCD models.
The temperature controls are preset in the factory at 38°F for the refrigerator compartment and –2°F
for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature as well as the actual temperature
in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based
on usage and operating environment.
Reset the LCD screen at any time by inserting a paper clip into the small hole next to the SD card slot under
the front edge of the dispenser opening.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
FREEZER
-2
FRESH FOOD
38
L
OCK
S
UBSTITUTIONS
P
HOTOS
N
UTRITION
F
ACTS
C
ONVERSIONS
S
ETTINGS
12:00 PM
HOLD 3 SECONDS
W
ATER
D
ISPENSER
W
ATER
F
ILTER:
G
OOD
E
XTRAS
FREEZER
-2
FRESH FOOD
38
LOCK
SUBSTITUTIONS
PHOTOS
NUTRITION FACTS
CONVERSIONS
SETTINGS
12:47 PM
HOLD 3 SECONDS
WATERDISPENSER
WATER FILTER: GOOD
EXTRAS
The HOME screen is the default display on the refrigerator. From this screen you can change the fresh food and freezer
temperatures, select the desired ice and water dispenser setting and access other functions as listed below. To return
to this screen at any time, press the HOME button in the lower right hand corner of the screen.
The Home Screen
Fresh Food Button: Displays actual as well as set
temperatures in fresh food compartment. When
TurboCool is active, it will be displayed
.
Status Bar: Shows status of water filter.
Conversions Tool: Accesses
the conversions function.
Nutrition Facts: Find basic nutrition
information for common food items,
including fruits, vegetables, meats
and cheeses.
Photos: Upload photographs
to your refrigerator. Organize
and arrange photos into
a screensaver or slideshow.
Substitutions Feature: A catalog of
substitutions for common ingredients
which are not readily available.
Settings Menu: Access refrigerator functions
such as TurboCool, Energy Saver and Door Alarm.
Change brightness of the display and replace
the water filter.
Dispenser Tab: Select water, crushed ice or cubed
ice. Also access the dispenser light.
Feature Lock: Hold for 3 seconds
to prevent accidental use of
the dispenser. The lock will change
from open to closed to indicate
the dispenser and controls have
been locked.
Freezer Button: Displays actual
as well as set temperatures in freezer
compartment. When TurboFreeze is
active, it will be displayed.
This product includes software which is based in
part on the work of the Independent JPEG Group