Filter
Top Products
11
Custom Panel Dimensions
42" Built-In Refrigerator
ZISW42D (white dispenser)
ZISB42D (black dispenser)
Standard Trim with 1/4" Panels
• 1/4" Panels: Cut panels to size.
• Custom handles with 1/4" door panels require Trim Kit
ZKH1. When using ZKH1 with the standard dispenser
trim, the length of the custom handle, top to bottom
cannot exceed 11-3/4".
• Tubular stainless steel handle kit, ZKHSS1.
• Custom collar dispenser trim with 1/4" door panels
require trim kit ZWCD1.
Standard Trim with Panels secured to
1/4" thick backing
• Applying a raised panel design to a 1/4" thick backing
(screwed or glued): Cut 1/4" panels to size, fabricate
the raised panel to permit clearances of at least 2"
from the handle side for fingertip clearance of the
standard handle, 1-1/4" from the hinge side to avoid
striking adjacent cabinetry and 5/16" from the top and
bottom edges to allow for the trim flange, then install.
• Countertops adjacent to refrigerator installation
should be mitered 45° degrees.
Note:
ZWCD1 custom collar dispenser trim and
ZKHT1 custom handle kits cannot be used in this
configuration.
Custom Door Panel Dimensions Using Standard Trim
1/4" thick panels
or
Panels secured to 1/4" thick backing
The grille panel frame is factory assembled
for 84" installation height. If installation height
varies, order ZG2 trim kit for optional side trim
pieces. Cut grille panel to sizes shown below.
Installation Height Panel Height
83" 8"
83-1/2" 8-1/2"
84-1/2" 9-1/2"
Important:
Maintain 1-1/2" min. gap between
top of doors and bottom of panel frame.
CUSTOM PANEL
DIMENSIONS
1 1/4"
Clearance
hinge side
2" Clearance
handle side
Appearance
Panel
1/4"
Thick
Backing
Raised Panel on 1/4" Thick Backing
Using Standard Handles
Door
Handle
Case Trim
9 7/16"
12 5/16"
The Cutout is 9 7/16" wide
by 12 5/16" high.
Custom Dispenser Cutout
16 5/8"
2 9/16"
67 7/8"
15 1/4"
25 1/4"
17 11/16"
Fresh Food
Panel
Freezer Panel
Standard
Dispenser
Freezer Panel
Custom
Dispenser
15 1/4
36 7/8"
41"
9" 1/4" Thick Panel
Custom Grille Panel
Important: Maximum weight for fresh food panels
is 50 pounds and 30 pounds for freezer door panels.