GE Monogram ZIS42N Refrigerator User Manual


 
35
ZKHT1 Trim Kit (For 3/4" Panels)
Support for Custom Handles
Option 1 Installation
Step 3
Assemble panel,
extrusion
and handle
Step 4
Mount
assembled
panels
Remove the door extrusions and door panels.
Drill 1/16" pilot hole through extrusion.
Drill clearance holes through the panel and extrusion.
Assemble the door panel, extrusions and custom
handle.
Install screw(s) long enough to pass through the
extrusion, door panel and into the handle.
Place assembled panel onto bottom trim with support
bracket tabs inserted into slots.
Push the panel back against the steel door with door
extrusion flush to the handle side of the door.
Open door fully to stop.
Install screws at the top, hinge side and end of door
extrusion.
Screw
3/4" Min.
1-1/2" Max.
Door Handle
ZKHT1
INSTALLATION