GE Monogram ZIS42N Refrigerator User Manual


 
29
ZKT42 Trim Kit
3/4" Custom Panels
ZKT42 – Install 17 screws
Secure support brackets to the bottom of the panels
with #4 screws provided. Align the brackets flush with
the bottom of the panels, with tabs protruding below.
Bracket location measured from the hinge side, is the
same for panels with custom handles or standard
handles.
Option 1 Installation
Step 3
Apply panel
support brackets
Step 4
Install panels
Position support bracket on freezer panel,
dimension A, from the hinge side edge.
Position support bracket on fresh food panel,
dimension B, from the hinge side edge.
Dimension A
ZKT42–6-3/4"
Dimension B
ZKT42–7-7/8"
Place the 3/4" panel on the bottom trim with support
bracket tabs inserted into slots. Push the panel back
against the steel door, making sure panel is flush to
hinge side trim.
Carefully drill starter holes in panel using a small
drill bit.
Attach the panel to the top and hinge side by installing
screws from the back of the trim through the wood
panel.
Follow the same procedure to install fresh food
door panel.
Re-install door handles with original screws.
ZKT42
INSTALLATION
Back Side Door Panel
B
A
Hinge
Sde
Support Bracket
Bottom EdgeBottom Edge
Freezer Panels Fresh Food Panel
Support Bracket