GE Monogram ZISW42D Refrigerator User Manual


 
5
DESIGN
INFORMATION
Design Information
42" Built-In Refrigerator
1/4" and 3/4" panels with
standard handles.
No trim
kits required.
3/4" Custom panels with
Tubular Stainless Steel
handles and custom
dispenser collar.
Trim
Kits ZKHTSS1, ZKT42 &
ZWCD1.
3/4" Custom panels with
custom handles.
Trim kits
ZKT42 & ZKHT1.
1/4" Custom panels with
Tubular Stainless Steel
handles.
Trim Kit ZKHSS1.
1/4" Custom panels with
custom handles.
Trim Kit
ZKH1.
These refrigerators are designed to be customized with
decorator door and grille panels. Field installed custom
door and grille panels are required.
Factory installed trim accommodates 1/4" thick custom
panels, Lexan
®
or stainless steel panel kits.
Appearance options are accomplished through the
use of one or more trim kits. Kits must be ordered
separately.
Door and grille panel sizes vary to accommodate the kit
being used. Sizes are provided in this booklet.
Advance
planning
exterior
appearance
options
You should:
1. Select the appearance option.
2. Order the trim kit(s) for that option.
3. Order the custom door and grille panels from the
cabinet manufacturer. The exact dimension for each
trim kit application is provided in this booklet. Find
and pull out the page for your application and fax or
send it to the cabinet manufacturer. The cabinet
manufacturer must have this information to con-
struct the panels accurately.
4. Determine the final installation situation and order
matching side panels.
3/4" thick custom panels–Without trim kits
A raised panel design, screwed or glued to a 1/4" thick
backing can be used. See pages 7 and 11 for panel
sizes and clearances.
Important: Maximum weight for fresh food panels is
50 pounds and 30 pounds for freezer door panels.
Appearance
Examples
Trim kit
Descriptions
Door Handle Options
ZKH1 – Provides the necessary framework to install
custom handles,
of your choice,
onto 1/4" thick panels.
(Handles not included.)
ZKHSS1 – Tubular stainless steel handles for 1/4" thick
panel installations.
ZKHT1 – Provides the necessary framework to install
custom handles,
of your choice,
onto 3/4" thick panels.
(Handles not included.) This kit must be used in
combination with ZKT42.
ZKHTSS1 – Tubular stainless steel handles for 3/4" thick
panel installations. This kit must be used in combination
with ZKT42.
Custom Panel Options
ZKT42 – Provides for the installation of 3/4" thick
trimless custom door and grille panels with the
standard (supplied) full length handle.
Dispenser Options
ZWCD1 – Provides for the installation of a custom
collar trim on the dispenser and for one continuous
custom panel on the freezer door. This kit can be used
alone, or with all other kits.
Toekick Option
ZWT1 – White toekick (supplied toekick is black).
Includes a white toekick to fit 36", 42", 48" side-by-side
models and 36" bottom mount and single door models.
Grille Panel Options
ZG2 – Provides 1/4" grille panel frame side pieces for
83", 83-1/2" and 84-1/2" installation heights. The supplied
grille panel frame is factory set for 84".
Note: ZG1 Grille Panel Kit is available for models
produced before January 1997. Panel sizes for
ZG1 and ZG2 are the same. The ZG1 kit can be
ordered from your Monogram dealer.