Filter
Top Products
Grandstream Networks, Inc. GXV300x User Manual Page 24 of 54
Firmware 1.2.3.7 Updated: 12/2010
Registered
This field indicates whether the accounts are registered to the related SIP server(s).
GXVx3000 can support up to three different SIP profiles.
PPPoE Link Up
This field shows whether the PPPoE connection is up if connected directly to DSL modem.
NAT /
NAT Mapped IP
This field shows what kind NAT router the GXV300x is connected to.
It is based on the resolve result of STUN Server used.
STUN will not work if it is Symmetric NAT. Outbound Proxy (or Session Border Controller) has
to be used to resolve this situation.
Total Inbound
Calls
Total number of calls received since last reboot.
Total Outbound Calls
Total number of calls made since last reboot.
Total Missed Calls
Total numbers of calls missed since last reboot.
Total SIP Message Sent
Total number of SIP messages sent out since last reboot.
Total SIP Message
R
e
ceived
Total number of SIP messages received since last reboot.
Total RTP Packet Sent
Total number of RTP packets sent since last reboot.
Total RTP Packet
Received
Total number of RTP packets received since last reboot.
Total RTP Packet Loss
Total number of RTP packets lost since last reboot.
E
ND
U
SER
C
ONFIGURATION
Once this HTTP request is entered and sent from a Web browser, the GXV300x will respond with a login
screen. There are two default passwords for the login page:
User Level: Password: Webpages allowed:
End User Level 123 Only Status and Basic Settings
Administrator Level admin Browse/edit ALL pages
After login, the next configuration page is the Basic Configuration page
.
T
ABLE
11:
B
ASIC
C
ONFIGURATION
D
EFINITIONS
Web Access
Select HTTP or secure HTTPS protocol for Web Access
Web Port
By default, HTTP uses port 80 and HTTPS uses port 443. This field is for customizable web
port.
End User
Password
This contains the password to access user lever Web Configuration Pages. This field is case
sensitive with a maximum length of 25 characters.