Filter
Top Products
Grandstream Networks, Inc. GXV300x User Manual Page 26 of 54
Firmware 1.2.3.7 Updated: 12/2010
Disable SIP User Display
Default is No. If enabled, SIP User ID will not
be
show
n
on the LCD
Disable IP Address Display
Default is No. If enabled, the IP address of the phone will not be shown on the LCD
LCD Screen Saver
Start Interval
Default value is 60 seconds, 0 means turn off this feature.
After 60 seconds the Screen Saver will start. The Screen saver file stored in flash is limited to
20 images or 320kb. Change screen saver in the same way as customized ring tone.
LCD Screen Saver
Refresh Interval
Default is 10.
This parameter controls the picture changing speed showed on the LCD.
LCD Auto Power Off
Interval
Default value is 300 seconds. 0 means LCD is always ON
After 300 seconds of idle time, the LCD will automatically Power Off.
LCD B
a
cklight
Brigh
t
ness
Default value is 128
.
LCD Contrast
Default value is 128
LCD Chroma Sat
u
ration
Default value is 128
LCD Text Color
Change the LCD font text color, adjust via selected numbers. Default is 255
OSD Text Color
Select desired OSD (On Screen Display) Text color from drop down box.
Default is white. The color can distinguish OSD from video background
PIP Position
Local Mirror Images showed via Picture in Picture positions in the LCD
.
Default is Top Left.
Starting Video OSD/PIP
Mode
Default value is OSD On, PIP On
Camera Zoom Mode
Select desired camera zoom mode (Wide, Optical Tele, Digital Tele). Can adjust local video
zoom either in mirror mode or during the call (on the fly) by pressing the Left or Right Arrow
Key
Camera Exposure
Select
desired Camera Exposure mode based on surroundings.
Default to
Auto
Camera Color Mode
Select desired Camera Color Mode (Color or Monochromatic). Default to Color Mode
Camera White Ba
l
ance
Select desired Camera White Balance to be automatic or Fixed.
Def
ault to Auto
Camera Lens Co
r
rection
Correct Camera Lens noise. Default is Yes.
Recommend set
to YES
to
reduce camera lens noise
and
improve
video
quality.
TV Output
Select desired TV Output type (PAL or NTSC).
A
DVANCED
U
SER
C
ONFIGURATION
The Advanced User configuration includes not only the end user configuration, but also advanced confi-
guration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous con-
figuration.
Login to the Advanced User Configuration page following the same directions as in Basic Configuration.
The factory default password for Advanced User is “admin”. User may change the password. The pass-
word is case sensitive with a maximum length of 25 characters.