Filter
Top Products
Grandstream Networks, Inc. GXV300x User Manual Page 32 of 54
Firmware 1.2.3.7 Updated: 12/2010
I
NDIVIDUAL
A
CCOUNT
S
ETTINGS
The
GXV300x
has 3 line appearances, each with an independent SIP account. Each SIP account
requires its own configuration page. Their configurations are identical.
T
ABLE
13:
SIP
A
CCOUNT
C
ONFIGURATION
P
AGE
D
EFINITIONS
Account Acti
ve
This field indicates whether the account is active. The default value for the primary account
(
Account 1
)
is Yes. The default value for the other t
wo
accounts
is
No.
Account Name
The name associated with each account - displayed on LCD.
SIP Server
SIP Server’s IP address or Domain name provided by VoIP service provider.
Outbound Proxy
IP address or Domain name of Outbound Proxy or Session Border Controller.
Used by GXV300x for firewall or NAT penetration in different network environment.
If it detects symmetric NAT, STUN will not work.
ONLY OBP or session border controller can provide solution for symmetric NAT.
SIP User ID
User account information provided by VoIP service provider (ITSP).
It is either an actual phone number or something formatted like one.
Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication.
It can be identical to or different from SIP User ID.
Authenticate Pas
s
word
SIP service subscriber’s account password for GXV300x to register to (SIP) server.
Name
SIP service subscriber’s name that is used for Caller ID display.
Use DNS SRV
Default is
No
.
If set to “Yes”, phone will use “Preferred DNS SRV” (Basic Setting Page) to look up server.
User ID is Phone Nu
m
ber
If the GXV300x has an assigned PSTN telephone number, this field should be set to “Yes”.
Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be attached to the
“From” header in SIP request to indicate the E.164 number
SIP Registration
This parameter controls whether the GXV300x needs to send REGISTER messages to the
proxy/server. The default setting is “Yes”.
Unregister on R
e
boot
Default is
No
. If set to “Yes”, the SIP user’s registration information will be cleared on re-
boot
and “*” will be in SIP Contact header to
notify the server
to unbinding all
.
Register Expiration
This parameter allows user to specify the time frequency (in minutes) that GXV300x re-
freshes its registration with the specified registrar. The default interval is 60 minutes. The
maximum interval is 65,535 minutes (about 45 days).
SIP
Registration
Failur
e-
Retry
Wait Time
Retry registration if the process failed.
Default is 20 seconds.
Local SIP port
This parameter defines the local SIP port used to listen and transmit.
The d
e
fault value for Accoun
t 1 is 5060.
It is 5062, 5064 for Account 2
and
Account 3.