Filter
Top Products
Grandstream Networks, Inc. GXV300x User Manual Page 30 of 54
Firmware 1.2.3.7 Updated: 12/2010
Authenticate
Conf File
Authenticate configuration file before acceptance.
Default is No.
S
creen Saver
Download
This is the path for screen saver image downloading. It may or may not be the same path as the
firmware or co
n
figuration server. User can
adjust
based on own
network
environment.
Phonebook
XML Download
This is the path for XML based phonebook to be downloaded into the phone.
User can use TFTP or HTTP to download the phonebook.
User can also select whether to overwrite the manually inputted phonebook records in the flash.
Network
Screen Saver
Enable Network Screen Saver.
User needs to enter a HTTP URL to download screen saver image from Internet.
Weather For
e
cast
Enable weather forecast to be displayed on LCD. User needs to enter a HTTP URL to download
the weather forecast that complies to the phone’s weather XML schema.
Headli
ne New
s
Enable RSS 2.0 feed to be displayed on LCD.
Off
-
hook Auto
Dial
To configure a User ID/extension to dial automatically when the phone is taken offhook.
DTMF
Payload Type
This parameter sets the payload type for DTMF using RFC2833. Default is 101.
Syslog Server
The IP address or URL of System log server.
Syslog Level
Select to report the log level. Default is
NONE
. The level is one of DEBUG, INFO, WARNING or
ERROR. Syslog messages are sent based on the following events:
•
product model/version on boot up (INFO level)
•
NAT related info (INFO level)
•
sent or received SIP message (DEBUG level)
•
SIP message summary (INFO level)
•
inbound and outbound calls (INFO level)
•
registration status change (INFO level)
•
negotiated codec (INFO level)
•
Ethernet link up (INFO level)
•
SLIC chip exception (WARNING and ERROR levels)
•
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following
components: GS_LOG: [device MAC address][error code] error message
For example:
May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]. Ethernet link is up.
NTP server
This parameter defines the URI or IP address of the NTP (Network Time Protocol) server.
GXV300x phone get its date and time from there.
User can turn on DHCP Option 42 to override the NTP server if there is one in the LAN.
Distinctive
Ring Tone
Select Distinctive Ring Tone 1 through 3 for a particular Caller ID specified.
The GXV will ONLY use selected ring tones for particular Caller IDs. For all other calls, default
system ring tone will be used.
If server support Alert-Info header and standard ring tone set (like Bellcore) specified, then Caller
ID must leave Blank and the ring tone will be used based on the info header from server.
System
Ring Tone
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on local telecom sta
n
dard.