Greenway Home Products VWD8000W-F Water Dispenser User Manual


 
Flushing the Reservoirs
To ensure clean, great-tasting water, it is recommended that the system be periodically flushed,
especially following long periods of non-use. Simply dispense 4-6 glasses of water from each button,
and allow system temperatures (hot and cold water) to stabilize prior to re-use.
Going Away on Vacation
When not using the dispenser for long periods of time or when going on vacation, conserve energy by
setting all power switches to the OFF position, turn the influent water line off, unplug the dispenser and
drain the reservoirs. Thoroughly flush the system upon return and startup of the dispenser.
Draining the Reservoirs
Drain the reservoirs before and after cleaning, when going on long
vacations or if not using the dispenser for long periods of time.
IMPORTANT! Turn all power switches to the OFF position and unplug
the dispenser before performing this procedure. Dispense hot water
until temperature drops to a safe level to avoid the risk of scalding.
1. Press all dispenser buttons until water no longer comes out.
2. Place a bucket beneath the drain outlet on the back of the unit.
3. Remove the cap and plug from the drain outlet and let the water
flow into the bucket. Replace the cap and plug.
IMPORTANT: Collect the water in a container, not the drip tray.
4. Plug unit in. The reservoirs will not fill with water unless plugged in.
Drain
valve
7
VWD8000W-F
Output per hr: Hot 1.2 gal / 4.6 L
Cold 0.5 gal / 2.0 L
Internal Tank: Hot 0.3 gal / 1.1 L
Cold 0.8 gal / 3.2 L
Heating Temp (approx.): 190°F / 88°C
Cooling Temp (approx.): 46°F / 8°C
Power Consumption: Hot 450 W
Cold 85 W
WARNING: The Water Dispenser
heats and dispenses water to
190˚ F / 88˚ C which can cause
severe burns or scalding.
DO NOT ALLOW CHILDREN TO USE
THE HOT WATER DISPENSING
BUTTON WITHOUT PROPER AND
DIRECT SUPERVISION.
Childproof
safety
switch
SPECIFICATIONS