Filter
Top Products
G9922
-13-
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Box Contents: (Figures 3 & 4) Qty
A. Miter Gauge ................................................ 1
B. Open End Wrench 14/17mm ...................... 1
C. Open End Wrench 17/19mm ...................... 1
D. Hex Wrench 5mm ....................................... 1
E. Carriage Bolts M8-1.25 x 16 ..................... 20
F. Flat Washers 10mm ................................. 20
G. Lock Washers 8mm ................................. 20
H. Hex Nuts M8-1.25 ..................................... 20
I. Hex Nuts M6-1 ........................................... 4
J. Lock Washers 6mm ................................... 4
K. Rubber Feet ............................................... 4
L. Phillips Head Screw M6-1 x 30 .................. 4
M. Sanding Drum w/Sleeve ............................. 1
N. Spare Sanding Sleeve ................................ 1
O. Upper Braces 14" ....................................... 4
P. Lower Braces 20" ....................................... 4
Q. Legs ............................................................ 4
Figure 3. Inventory 1
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 4. Inventory 2
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q