Filter
Top Products
Using Your change-a-bowl
™
1. Assemble power unit by inserting
cover into motor housing. Rotate
interlock tab on cover until it snaps
into power unit.
2. Insert GladWare
®
bowl (1
3
⁄4 cup, 414
ml) into permanent bowl. Make sure
the lid of the GladWare
®
bowl has
been removed. The permanent bowl
may also be used without the
GladWare
®
bowl for processing.
3. Insert blade assembly in bowl, align-
ing notches on blade assembly with
tabs on permanent bowl. Blade is
sharp; handle carefully.
4. Place food in bowl. See Processing
Chart for recommendations. Food
must be inserted in the bowl
between the plastic support bars of
the blade assembly.
5. Place power unit on top of blade
assembly, matching notches with per-
manent bowl tabs. Plug into electrical
outlet. To pulse, press down on power
unit. For continuous operation, press
and hold.
6. Remove power unit. Carefully
remove blade assembly. Blade is
sharp; handle carefully.
7.When finished, unplug unit from outlet.
IF CHOPPER DOES NOT START:
Review Step 1 to ensure power unit is
correctly assembled.
Tip: When changing GladWare
®
bowls
for different foods, unplug unit and wipe
inside of cover with damp cloth or
remove cover from motor housing and
rinse.
4
840140700 Ev02.qxd 4/26/06 9:39 AM Page 4