Filter
Top Products
Model OFE/OFG/OEA/OGA-341, 342
2-19. SPEAKER ASSEMBLY The speaker assembly emits audible signals to let the operator
know when cooking and hold times are finished.
1. Remove electrical power supplied to unit.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
Figure 2-58 breaker, or unplug cord at wall receptacle.
2. Remove control panel.
3. Pull the power switch connector from back of panel.
Figure 2-58.
Figure 2-59
4. Pull the transformer connectors from back of panel.
Figure 2-59.
Figure 2-60 5. Using a 5/16” nutdriver or wrench, remove the 4 nuts securing
the PC board shield and pull shield from studs. Figure 2-60.
6. Pull the speaker connector from control board. Figure 2-61.
Figure 2-61
7. Using a 5/16” nut-driver or wrench, remove the 2 nuts securing
the speaker to the shield and remove speaker from panel.
Figure 2-62
8. Install new speaker in reverse order.
Figure 2-62
2-22 1003