Hitachi r-sf42bms Refrigerator User Manual


 
37
Before Use
3
4
Cooling down the inside of the refrigerator
It may take more than 4 hours through 24 hours to cool well the inside of the refrigerator, depending on
conditions such as the ambient temperature or the storage state of foods.
Perform
CLEANING
(Ice Maker Cleaning) when using the automatic ice making function  rst.
Pg.50
A series of ice making operation will start automatically after the inside of the refrigerator is cooled well.
(When using for the  rst time, it may take 24 hours and more to make ice.)
Make sure to empty food and ice from the refrigerator. Always
drain water from the water supply container and ice tray.
Secure the door with tape.
Lay a protective sheet or cloth to protect the  oor from damage
and catch remaining water spilled from the refrigerator.
With a large piece of old cloth underneath, tilt the refrigerator
backward to drain water.
More than two persons should grip the handles for carrying
and move the refrigerator.
See Preparation before use for installing the refrigerator in a
new location.
Pg.36
Do not remove the sticker from the back of the refrigerator. This
sticker is necessary to secure the performance and safety.
Do not remove the plastic parts and label from the bottom part of the
side of the refrigerator.
If you wish to install the refrigerator in a hot spring area exposed to sul de gas, you may need to apply anti-rust treatment
to the piping. Contact your dealer in advance. Failure caused by gas damage will not be covered under guarantee.
Stickers
Left/Right
Plastic parts
Label
Caution
Transporting your refrigerator (transport for moving)
Such as old cloth
On the Power Plug
and Grounding
It is not a problem to plug in the
power cord soon after installing the
refrigerator.
Use a wall outlet exclusively
when connecting the power cord.
(Alternating current 220 230V,
rated 15A or more)
Preparation for an earthquake has been made
properly?
It is recommended to  x the refrigerator to a sturdy wall or pillar using
two "safety belt against overturning for refrigerators".
Option: "Safety belt against overturning for refrigerators" (Parts No.
R-826CV 300: belt x 1) Contact your dealer for details.
Screw x 4
(attached to belt)
Belt