Filter
Top Products
38
Display area
Touch Area
(Switch Area)
GENERAL FEATURES AND USE
Control Panel
Approximately two minutes after the end of operation, indicator lamps, excluding
FRE
EZER ,
REF
RIGERATOR ,
EN
ERGY SAVING ,
QUIC
K ,
WA
TER and eco Operation , become unlit for energy saving.
To con rm settings, open a refrigerator door or push any button. The indicator lamps become lit again.
When opening a refrigerator door, the displayed characters become lit. They become unlit about 15 seconds after closing it.
Be sure to operate the Control Panel with all the doors closed. It remains inactive when you push the button with a
refrigerator door opened or displayed characters blinking.
When a door remains open for 30 minutes or more, door alarm is raised to indicate it.
Pg.57
■
Blinking
(Locking the Control Panel) indicates that the refrigerator is in an abnormal state.
Pg.56
Notice
Notice
Providing information
Selecting an ice making mode
Adjusting temperature settings
Selecting a cooling mode
eco operation indicator lamp
(Locking the
Control Panel)
Pg.57
You can select a mode from
NORMAL , QUICK and
OFF .
Pg.45
Set temperature for each
compartment.
Normally, use the
M
ID. setting.
Refrigerator Compartment
Pg.40
Freezer Compartment
Pg.42
Vegetable Compartment
Pg.46
Set a cooling mode for each
compartment.
FRE
E
ZER
Pg.43
REF
R
IGERATOR
Pg.41
“
EN
ERGY SAVING
”
Pg.39
All the indicator lamps are lit
for the sake of explanation.
●
CLEANING
Allows you to wash the
ice tray and water supply
channel.
Pg.50
“
W
ATER
Pg.56
Allows you to prevent
erroneous operation
on the Control Panel.
●
Is lit when the
refrigerator is
operated with a low
energy consumption,
such as in Frost
Recycle Cooling.
Pg.57
●
You can also turn off
the indicator lamp.
Pg.57
When the water level
in the water supply
container becomes
low, this lamp is lit
automatically.
●
Control Panel Image (It is an image when all displays are turned on. Only the selected character display is
turned on when actually operating it.)
The character display will be turned off in about 2 minutes after the operation is fi nished. Quick
Cooling operation and eco operation indicator lamps will not be turned off. In order to check the
setting, push either button. The indicator lamp will be illuminated again.