Hitachi r-sf42bms Refrigerator User Manual


 
54
When this happens Please check. This is the cause.
TROUBLESHOOTING
Frost and/or dew occur
Refrigerator cools overly
Dew condensation
Frost and/or dew
adhere to the
refrigerator interior
or the frame
of the drawer
compartment.
Dew condensation
occurs in the
Refrigerator
Compartment
Dew adheres to
the outside of
the refrigerator
(exterior, door seal,
door and drawer
compartment etc).
Dew condensation
occurs in the
Vegetable
Compartment
The door or the drawer compartment may not temporarily have been closed completely.
Check whether the drawer compartment or the door has been closed completely after closing
them.
The door may be opened/closed frequently or door may have remained open for a long time.
Reduce the number of times of opening and closing the door or open/close the door quickly.
Dew may adhere to the wall and/or frost may adhere
around the outlet of the cooling air of the aluminum
panel when the number of opening/closing the door is
large or humidity around the refrigerator is high.
Wipe off them with a dry cloth.
Dew may adhere to those parts when the indoor humidity is high (ex: rainy day).
Frost and/or dew may adhere to the refrigerator interior or the door frame when the warm outside
air comes in contact with those parts.
Wipe off with a dry cloth.
The humidity in the Vegetable Compartment is higher than other compartments. (To prevent
vegetables from drying and to make them last longer)
If it is undesirable that dew adheres to the stored vegetables, wrap them with the plastic  lm.
Water may drop into cases placed in the Vegetable Compartment due to dew concentration.
Wipe off them with a dry cloth.
Refrigerator
cools overly
Foods freeze
MAX. is selected in the temperature setting. Switch it to MID. .
Pg.41, 43
The surrounding temperature is lower than 5˚C. The temperature inside may go down too
much when the ambient air temperature is low. Switch the temperature setting to MIN. .
Pg.41, 43
Do not place any food in front of the cold air blowout port.
Aluminum panel
Door is not in a horizontal state
Door is not in a
horizontal state
Another door
opens after
closing one
door.
More force is
required to
open the door
immediately after
closing the door.
Installation place may not be horizontal.
Left side or right side of the door may be slightly lower when the left or right leg is sunk in the
oor surface because of the soft  oor material and the addition of food weight.
This does not affect the refrigerator performance. Adjust the refrigerator adjustable mount to keep
it level if you want to correct it.
Pg.36
Lay the  rm board which has more than 1cm thickness on the  oor if the refrigerator itself
inclines.
Another door may open for a moment by the wind pressure because cool air path connects each
compartment.
It is because air entered the Refrigerator Compartment is rapidly cooled and the pressure in the
Refrigerator Compartment temporarily lowers.
The refrigerator becomes hot
The side of the
refrigerator becomes
hot. Hot air comes
from the bottom of
the refrigerator
Hot air may come from the bottom of the refrigerator to exhaust the heat generated when the
cooling device operates.
The temperature may reach 50 60˚C immediately after installation or in summer, but there is no
problem with the safety and the performance.