Filter
Top Products
–2–
Installation, Operation, and Care of
MODEL 5801 MEAT SAW
SAVE THESE INSTRUCTIONS
GENERAL
The 5801 Meat Saw is rugged, durable, and easy to clean. The saw is equipped with a water resistant
3 HP electric motor and direct gear drive transmission that provides a blade speed of 3500 feet per
minute. The carriage (Fig.1) has stainless steel ball bearings providing easy travel and dependability.
The shaped front edge of the carriage is comfortable to the operator's body even when leaned on during
movement. The carriage lock is standard. The upper pulley cover and baffle (Fig. 1) are standard in
durable plastic, optional in stainless steel.
Table, carriage, pulleys, guides, and wiper assemblies can be quickly removed without tools for ease
of cleaning. Moving parts are enclosed but accessible. The blade is guarded above and below the
cutting zone. The pusher plate is provided to eliminate the need of handling items close to the blade;
it can ride on the right "flanged-end" of the carriage so you keep your hands away from the cutting edge
of the blade.
For electrical specifications above 250 volts, a transformer provides a 115 volt control circuit voltage.
Thermal overload protection is an option.
One long-life blade is furnished with each saw as standard equipment. This blade cannot be
resharpened; replacement blades are available through your local Hobart Service Office.
Fig. 1
© HOBART CORPORATION, 1995
PL-40830-1
UPPER PULLEY COVER (SST)
COLUMN GUARD
GAUGE PLATE
TABLE (RIGHT)
GAUGE PLATE HANDLE
LOCK LEVER
LOWER COVER (SCRAP PAN)
LEGS
FEET
CARRIAGE LOCK
CARRIAGE
TABLE (LEFT)
SAW BLADE
UPPER GUIDE AND GUARD
SWITCH KNOB