Filter
Top Products
– 16 –
SETUP (All Models)
Sanitizing Mode
• With the machine OFF, press the ON key.
• Immediately press and hold the OFF key.
The display initializes until
88
displays.
Next,
SET X
°F
°C
displays. X can be H, C or P:
H = Hot Water Sanitizing, Internal Booster.
C = Chemical Sanitizing, No Booster.
P = Hot Water Sanitizing, External Booster.
• Press CYCLE to select P, H, or C as the sanitizing mode.
After 5 seconds, the selection is saved and the machine turns off.
End of Cycle Buzzer
• With the machine OFF, press the ON key.
• Immediately press and hold the OFF key.
The display initializes until
88
displays.
Next,
SET X
°F
°C displays. X can be P, H or C. (See above).
• Press and hold the OFF key.
Next,
SET WASH XX
displays. XX can be On or OF:
SET WASH
On = End of Cycle Buzzer is ON.
SET WASH
OF = End of Cycle Buzzer is OFF.
• Press CYCLE to select On or OF for the End of Cycle Buzzer.
After 5 seconds, the selection is saved and the machine turns off.
SHORTCUT IF
PROGRAMMING BOTH FEATURES
AT THE SAME TIME.
SET WASH OF
SET WASH On
SET C
°F
°C
SET H
°F
°C
SET P
°F
°C