Filter
Top Products
– 10 –
SETTING THE TEMPERATURE
1. Select the cooking mode by pressing the
Convection, Steam or Convection and Steam
(Combi) Button(s).
2. Press the Selection Line Button next to the
Temperature icon. The icon will be highlighted
to indicate that it has been selected and the
set temperature will be shown.
3. Use the Plus/Minus Buttons to adjust the
temperature. After a few seconds the
Temperature icon will change contrast and
the set oven cavity temperature will be
displayed.
NOTE: Press and hold the Selection Line Button
next to the Temperature icon to view the current
oven temperature.
110
°F
PH
1/1
3
START
INITIAL START-UP
When the machine is connected to electrical power, the display screen will show the current time and date
as set in the oven and the countdown for service/deliming. The internal clock should be set at this time.
SETTING THE INTERNAL CLOCK
1. Press and hold the Selection Line Button next
to the time and date. The hour portion of the
time will fl ash.
2. Use the Plus/Minus Buttons to adjust the
hour.
3. Press the Enter Button. The minute portion of
the time will fl ash.
4. Repeat steps 2 and 3 until the time and date
are set.
NOTE: Press the Selection Line Button below the
time and date to toggle the time between 12 hour
and 24 hour time.
500H
11:28 AM 05/19/07
HOUR
FLASHING
PRESS TO
CHANGE TO
24 HOUR TIME
11:28