Filter
Top Products
– 17 –
WRITING A COOKING PHASE
It is possible to link up to 10 cooking phases without
using the program function.
1. Select the cooking mode by pressing the
Convection Button and/or Steam Button.
2. Set cooking temperature or Delta T
temperature.
3. Set cooking time or use the core probe. The
Cooking Phase will indicate 1 of 1.
4. Set the vent position or the humidity level,
depending on the cooking mode being
used.
5. Set the fan speed.
6. Press the top Selection Line Button to add a
phase. The Cooking Phase will indicate that
is ready for the next phase 2 of 2.
7. Repeat steps 1 through 6 for each phase.
NOTE: Press the top Selection Line Button to review
the cooking phases.
8. Load product, close door and press the START/
STOP Button to begin cooking phases.
ERASING A COOKING PHASE
1. Press the top Selection Line Button until the
phase to be erased is displayed.
2. Press and hold the top Selection Line Button.
The buzzer will sound and the phase will be
erased.
NOTE: Once a phase is erased the remaining phases
automatically renumber.
350
°F
PH
1/1
2
01:17
PH
1/1
350
°F
PH
2/2
4
00:47
85
PH 2/2