Filter
Top Products
– 21 –
DISPLAY SCREEN CLEANING AND SHUTDOWN ICONS
STOP
Stop Only Select this feature if the oven will be shutdown and not cleaned.
Manual Clean Cycle Select this feature if the oven cavity is to be cleaned manually.
Auto Clean Cycle Select this feature if the oven cavity is to be cleaned automatically.
MAINTENANCE
Disconnect electrical power supply and follow lockout / tagout procedures.
Fluorescent lamp in display panel contains a small amount of mercury. Please dispose of
according to local, state or federal laws.
SERVICE ADJUSTMENTS
The Combi Oven default settings can be customized to fi t your own personal needs using service parameter
setup. Contact your local Hobart Service offi ce for any adjustments needed on this equipment.
SHUTTING DOWN THE OVEN
1. Press the ON/OFF Button. The display screen will show the Cleaning and Shutdown icons.
2. Press the Selection Line Button next to the icon to be performed.
CLEANING
The oven and its parts are hot. Always allow the oven to cool before cleaning.
STOP
Daily Cleaning
1. Remove any large pieces of food that may be in the oven cavity before
starting a cleaning cycle.
2. Perform one of the cleaning cycles.
3. Clean the door gasket with a soft, clean, damp cloth after every cleaning
cycle. This will ensure a long life for the gasket.
4. Do not use cleaners containing grit, abrasive materials, bleach, harsh
chemicals or chlorinated cleaners. Do not use steel wool on stainless steel
surfaces.
5. Be cautious with new or improved cleaning formulas; use only after being
well tested in an inconspicuous place.
Manual Clean Cycle
1. Press the Selection Line Button next to the Manual Clean Cycle icon.
2. Press the START/STOP Button to begin the clean cycle. The buzzer will sound to indicate that the
interior is ready to be sprayed with an appropriate detergent.
3. Open the door and spray the detergent.
4. Close the door, the clean cycle will restart and end with the appropriate rinse of the cavity.