Filter
Top Products
– 11 –
SETTING THE HUMIDITY
1. Select Combi Mode by pressing the Convection
Button and Steam Button.
2. Press the Selection Line Button next to the
Humidity icon. The icon will be highlighted to
indicate that it has been selected and the set
humidity will be shown.
3. Use the Plus/Minus Buttons to adjust the
humidity. After a few seconds the Humidity
icon will change contrast and the set humidity
will be displayed.
SETTING THE TIMER
1. Select the cooking mode by pressing the
Convection, Steam or Convection and Steam
(Combi) Button(s).
2. Press the Selection Line Button next to the
Timer icon. The icon will be highlighted to
indicate that it has been selected and the set
timer will be shown.
3. Use the Plus/Minus Buttons to adjust the timer.
After a few seconds the Timer icon will change
contrast and the set timer will be displayed.
NOTE: The Hand icon indicates the timer is in
continuous mode and no timer is used.
350
°F
PH
1/1
3
START
350
°F
PH
1/1
3
01:25
5
SETTING THE VENT POSITION
1. Select Convection Mode by pressing the
Convection Button.
2. Press the Selection Line Button next to the Vent
Position icon. The icon will toggle between the
open and closed position.
350
°F
PH
1/1
VENT
OPEN
3
01:25