Filter
Top Products
– 3 –
Installation, Operation, and Care of
MODEL D300 MIXERS
SAVE THESE INSTRUCTIONS
GENERAL
The D300 Mixer (30 quart) features a
3
/4 horsepower motor, a timer, and a #12 attachment hub as standard
equipment. The standard 30 quart mixer bowl can be equipped with a variety of agitators. A 20 quart bowl,
bowl adapter, and agitators are available options on the D300.
Bowl Guard is standard equipment on all D300 models.
Programmable Timer Controller is optional on D300 models.
These mixers can be ordered with deluxe finish, which includes a chrome plated transmission case, base,
bowl support, and pedestal.
A variety of attachments and accessories are available for all mixers. These are described in a separate
Use and Applications Handbook
which is furnished with each mixer.
INSTALLATION
UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to
be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine
data plate.
LOCATION
Place the mixer in its operating location. There should be adequate space around the mixer for the user
to operate the controls and install and remove bowls.
A Deck Plate Kit is available from Hobart and holes are provided in the base for permanent bolting to the
floor, although this is not necessary in normal installations. Four plastic plugs are supplied with the mixer
to plug these holes if they are not used.