Hobart D300 Blender User Manual


 
8
PROGRAMMABLE TIMER CONTROLLER (when equipped) continued
To Revise the Preset Mixing Times contained in P1 or P2 . . .
Each preset key has four preset time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or
P2 indicator light identify which preset time is being displayed.
Beginning from the Idle display
[ : ]
, press P1 or P2 to display the #1 preset mixing
time. ( Pressing P1 or P2 again will display the next preset time, etc.)
Turn the KNOB to change the time for the indicated preset.
Press SAVE to retain the revised time and move to the next preset time.
Repeat from for each preset time (1, 2, 3, and 4 contained in P1 or P2).
Pressing CLEAR will retain the saved times and return to the Idle display
[ : ]
.
The timer reverts to the Factory Programmed Preset Times after any power interruption:
Factory Programmed Preset Times
Preset Key Indicator
1 2 3 4
P1 01:00 02:00 10:00 00:00
P2 02:00 01:00 05:00 03:00
-
P1
-
P2
01:00
- - - -
1 2 3 4
Indicators above P1
and 1 indicate the
first preset time
contained in P1.