Filter
Top Products
– 3 –
Installation, Operation, and Care of
MODEL HFB6
ELECTRIC
OVEN
SAVE THESE INSTRUCTIONS
GENERAL
Your Hobart
Flash
Bake oven is a versatile oven that employs a revolutionary high quality, high-speed
cooking technology. The baking process is so fast that food retains its natural juices. Bread products
brown and become crisp while vegetables retain their color and texture.
Flash
Bake ovens use visible and infrared light energy to cook by radiative heat transfer. The infrared
energy browns the surface of the food, while the visible light energy penetrates and heats it internally.
Using the proper combination of visible and infrared light energy, the
Flash
Bake oven provides
efficient, high-speed baking and high quality food.
The HFB6
Flash
Bake oven may be ordered with a 6 foot (1829 mm) power cord for receptacle
installation, or with a junction box for direct line connection.
INSTALLATION
Before installing, verify that the electrical service agrees with the specifications on the rating plate
located on the rear of the oven. If the supply and specifications do not agree, do not proceed with the
installation. Contact your dealer or your local Hobart-authorized service office immediately.
UNPACKING
Immediately after unpacking, check for possible shipping damage. If the oven is found to be damaged,
save the packaging material and contact the carrier within 15 days of delivery.
Check to make sure you have the following items:
1. Oven (1) 5. Cooking guide (1)
2. 16" (406.5 mm) stainless steel grill (1) 6. Lamp shield scraper (1)
3. Upper lamp shield (1) 7. Menu cards (3)
4. Instructions Manual (1)
LOCATION
When deciding oven placement, be sure to consider clearance and available air for oven cooling. If the
inlet air is obstructed or heated, the oven will not operate properly.
Install the oven on a level countertop.
There must be a 3" (76 mm) minimum clearance on each side of the oven. The area behind the oven
around the blower must be kept clear of obstructions and allow free air circulation.
Make sure the cord can be plugged into the appropriate outlet.