Filter
Top Products
– 29 –
4 Clean ceiling area around the elements
and convection fan (Figs. 39, 40).
5. Wash vent-grate and fan blade in a sink
with warm soapy water (Fig. 41).
6. Rinse and allow to dry.
7. After cleaning, reinstall fan blade by
mating D-shaped fan onto D-shaped
shaft and then tightening center nut
counterclockwise (Fig. 42).
8. Reinstall vent-grate; tighten nuts using
7
/16" nutdriver (Fig. 43).
Fig. 39 Fig. 40
Fig. 41
Fig. 42
Fig. 43
CENTER NUT
FAN
D HOLE