Filter
Top Products
– 37 –
9. After cleaning, reinstall 2 fan
blades: Mate D-shaped hole on
fan onto D-shaped shaft; then
tighten nut (counterclockwise)
(Fig. 68).
Fig. 68
CENTER NUT
FAN
CENTER NUT
FAN
D HOLE
10. Reinstall element cover: Raise
left hinge (end of U-chanel) up
around left hinge pin (Fig. 69).
LEFT HINGE PIN
LEFT
HINGE
Fig. 69
11. Raise right side of element cover up and swing toward front of
oven. The right-hinge (end of U-channel) should hang from the
right-hinge pin. Element cover should hang straight down from
left- and right-hinge pins (Fig. 70).
Fig. 70
⇑
RAISE UP AND
SWING FORWARD
➥
➥
RIGHT
HINGE PIN
RIGHT
HINGE
➥
➥
⇑
RAISE UP AND
SWING FORWARD