Filter
Top Products
3
How to Program Rotisserie
How to Save a Program
1. Turn the ON-OFF switch to ON. Red light indicates the unit is
powered.
2. Select a Program (1-9).
Press for 3 seconds to enter program mode.
The program display will show the number being programmed.
3. Cooking “Step” 1 LED is lit.
Time display blinks. Enter the desired cook time from 0:01 (one
minute) to 6:00 (six hours).
Press to accept (or press to void and reenter).
Temperature display blinks. Enter the desired cook temperature
from 180. Press to accept (or press to void and reenter).
4. Cooking “Step 2” LED is lit.
Follow #3 above.
5. Cooking “Step 3” LED is lit.
Follow #3 above.
6. Hold “Step 4” LED is lit.
Follow #3 above.
How to Add Cook Time
Press during a cook cycle to add 5 minutes of cook time.
NOTE: MANUAL MODE is 0 and cannot be saved into memory.
How to Set Clock
Press CLOCK.
Enter time of day with number pad.
Press CLOCK to toggle AM or PM, if needed.
Press ENTER to accept the entry. Clock is now set.
Figure 1