Filter
Top Products
– 3 –
Installation, Operation and Care of
Model LT1 DISHWASHER
SAVE THESE INSTRUCTIONS
GENERAL
The Model LT1 Dishwasher is a low temperature (140°F recommended, 120°F minimum), chemical
sanitizing, rack-type dishwasher for use with accessory 20" x 20" racks. It is equipped with a
3
⁄4
horsepower thermally protected (internal) pump motor. The motor must cool to restart the pump.
The revolving stainless steel ball bearing wash / rinse arms above and below provide thorough
distribution of water jets to all dishware surfaces. Arms are easily removable for cleaning and are
interchangeable. Stainless steel tubing connects upper and lower systems.
All three doors open together when the spring counter-balanced handle is raised. Durable door glides
provide easy opening and closing.
The LT1 can wash up to 40 racks per hour. Water usage is 1.7 gallons per rack.
After initial manual fill, the machine automatically
washes a rack of dishes, drains the wash water,
and then refills with fresh water for the rinse
cycle. The rinse water remains in the machine
for the next wash cycle. At the proper time
during each cycle, an appropriate amount of
detergent, rinse aid, and sanitizer chemicals are
pumped into the wash tank.
Cycle timing is as follows:
Wash . . . . . . . . 40 seconds
Drain . . . . . . . . 10 seconds
Flush . . . . . . . . . 3 seconds
Fill . . . . . . . . . . . 9 seconds
Rinse . . . . . . . . 20 seconds
The stainless steel front panel is available as an
option.
MODEL LT1 DISHWASHER
SHOWN WITH OPTIONAL FRONT PANEL