Hobart LT1 ML-104239 Dishwasher User Manual


 
– 9 –
OPERATION
CAUTION: Items made of pewter, aluminum, and silver will be attacked by the sodium
hypochlorite sanitizing agent (liquid bleach) used in this machine and therefore should not be
washed in it.
In addition to these detailed instructions, brief instructions for operation and cleaning can be found on
the front of the control box.
CONTROLS (Fig. 11)
Fig. 11
The
POWER
switch turns the machine on and off.
The
DETERGENT, SANITIZER
, and
RINSE AID
priming switches are used to prime the delivery
pumps. To prime the pumps, press and hold each priming switch until the corresponding chemical
reaches the end of the delivery tube.
The
DRAIN/FILL
switch, when pressed and held on
FILL
, opens the fill valve and allows water to flow
into the dishwasher. The fill valve will remain open as long as the switch is pressed.
The
DRAIN/FILL
switch, when pressed and held on
DRAIN
, opens the drain valve and allows water
to drain out of the dishwasher. The drain valve will remain open as long as the switch is pressed.
The
CYCLE LIGHT
indicates when a washing cycle is in progress.
The
THERMOMETER
indicates water temperature in the dishwasher sump.
The
COUNTER
indicates the number of cycles that have been run.
PL-40926-2
DETERGENT
PRIMING SWITCH
RINSE AID
PRIMING SWITCH
SANITIZER
PRIMING SWITCH
POWER SWITCH
DRAIN/FILL SWITCH
CYCLE LIGHT
COUNTER
THERMOMETER