Filter
Top Products
F25230 (Rev. A, May 2008) © HOBART 2008Page 2 of 8
Installation (LX/LXi and LXG/LXiG)
WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES.
1. Remove unit from wall to provide access to
components.
2. Remove Base Cover from front of unit per Fig 1.
3. Remove Service Cover, Wire Way and Motor
Cover from rear of unit per Fig 2.
NOTE: This kit is for all LX/ LXi and LXG/LXiG
dishwashers. Machines with serial numbers between
23-1083-999 and 23-1084-003 and starting with
serial number 23-1085-462 and higher have a drain
pump. Machines with lower serial numbers utilize a
drain solenoid valve. Identify machine type and
select correct wiring harness from kit.
NOTE: For drain pump machines use harness
919275. For solenoid machines use wiring harness
919276.