Filter
Top Products
24 www.honeywell.com
PW-6000 Installation
System Configuration via Web Interface
3. Specify the maximum period of time a session will remain open without user activity. If the
period expires without user activity, the user is logged out. After specifying the time period,
click Save Session Timer to save the setting.
4. Configure the auto-save timer. This feature, if enabled, automatically saves the hardware
configuration in non-volatile Random Access Memory (RAM) at the specified time interval. If
you select Enable Auto-Save, then select a time interval from the drop-down list, and click
Save Auto-Save Timer to save the setting.
Editing a User
To edit a user record, click to select the user from the Username column and then click Edit. Use the
information provided in the previous section, “Adding a User,” to edit the record.
Deleting a User
To delete a user record, click to select the user from the Username column and then click Delete.
4.8 Restore Default Screen
Click the Restore Default link on the navigation bar to restore the default configuration values for the
PW-6000:
Figure 13: PW-6000 Web Server Restore Default Screen
1. Click Restore Default to reload the default factory settings for all the configuration variables.
2. Click Restore Current to reload the current operational settings for all the configuration
variables.