Filter
Top Products
16
III. Cleaning and Maintenance
WARNING
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any cleaning or maintenance is done to the unit. Make
sure that none have fallen into the storage bin.
A. Cleaning and Sanitizing Instructions
Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More
frequent cleaning and sanitizing, however, may be required in some existing water
conditions.
WARNING
1. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
4. After cleaning, do not use ice made from the cleaning and sanitizing
solutions. Be careful not to leave any solution on the parts or in the storage
bin.
Fig. 5
Power Switch
Control Switch
Louver
Air Filter
Connector
(push-button model only)
Front Panel
Top Panel
Bin Top
Drip Ring
Agitator
Spout A
Spout B
Grille
Ice Chute
Storage Bin
Spout B
(optical-sensor
model only)
Drain Pan
Extruding Head
Evaporator Assembly
Reservoir
Power Cord