Filter
Top Products
30
[b] STORAGE BIN - Following Cleaning Procedures for Water System[b] STORAGE BIN - Following Cleaning Procedures for Water System
[b] STORAGE BIN - Following Cleaning Procedures for Water System[b] STORAGE BIN - Following Cleaning Procedures for Water System
[b] STORAGE BIN - Following Cleaning Procedures for Water System
1) Remove the Front Cover of the Storage Bin.
2) Remove the thumbscrews, first from the vertical plane and then from the horizontal
plane of the Motor Brackets. Move the Agitating Motor(s) and the Dispensing Motor
toward you. Then remove the Agitator(s) and the Dispensing Auger. See Fig. 13.
Note: Models DCM-750BAF and BWF are provided with two
Agitators, and models DCM-500BAF and BWF with
one Agitator.
Fig. 13Fig. 13
Fig. 13Fig. 13
Fig. 13
3) Remove the Bin Control Bracket Assembly. See Fig. 14
4) Remove the Snap Pin, the Shaft and the Activator.
5) Remove the thumbscrews, the Spout-Bin and the Spout Gasket-Bin. See Fig 15. For
models DCM-750BAF and BWF, remove the Ice Guide, Drain Pipe Holder and Drain
Pipe in the Storage Bin as well.
Fig. 14Fig. 14
Fig. 14Fig. 14
Fig. 14
Fig. 15Fig. 15
Fig. 15Fig. 15
Fig. 15