Filter
Top Products
9
• Side Panel (R): Remove the screw. Slide forward slightly and lift off.
• Front Insulation: Lift up slightly, and pull towards you.
• Top Insulation: Push up at front corner, and pop off.
C. Location
NOTICE
• This icemaker is not intended for outdoor use. Normal operating ambient temperature
must be within 45°F to 100°F (7°C to 38°C); Normal operating water temperature
must be within 45°F to 90°F (7°C to 32°C). Operation of the icemaker, for extended
periods, outside of these normal temperature ranges may affect icemaker
performance.
• This icemaker will not work at sub-freezing temperatures. To prevent damage to the
water supply line, drain the icemaker when the air temperature is below 32°F (0°C).
See “III. C. Preparing the Icemaker for Periods of Non-Use.”
For best operating results:
• Icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
Fig. 1
Top Insulation
Front Insulation
Front Panel
Side Panel
Screws
Screw
Top Panel
Side Frame