Filter
Top Products
Millennium II 6000 Installation Manual
© 2003-2004, IMI Cornelius Inc. - 5 - Publication Number: 620919546INS
16. Brixing Concentrate
The following procedures describe how to adjust the water to concentrate ratio (brix) according to taste.
Contact the concentrate supplier for recommended brix ratios.
A. Remove the flavor strips above the dispense valves.
B. Sample the finished drink. Increase or decrease the water ratio by inserting a flat blade screw-
driver into the slot behind the flavor label and turning the water flow control screw clockwise
(more water) or counter–clockwise (less water) until the desired water to concentrate ratio is
achieved. Repeat the procedure on the remaining valves.
C. Replace the flavor strips.
NOTE: If the flow control does not respond, there may be debris caught between the internal
ceramic spool and sleeve. Try dislodging the debris by pressing the dispense switch several
times or by turning the flow control adjustment screw all the way in and out several times.