Filter
Top Products
UF-1 and UFB-1 Valves Training Manual
© 1999-2005, IMI Cornelius, Inc. - 15 -
8. When the foam in the cup has lowered, press and release the large rectangular
button. The valve dispenses a top-off and shuts off when the foam again
touches the lever. The LED is now on steady.
9. Press the program switch until the LED turns off.
10. If you wish to disable the top-off, follow steps 1 through 3. Remove the cup
from the lever. This will enter a zero value for the delay time and disable the
top-off fill. Press the program switch for 3 seconds.
Note: The Optifill
TM
valve does not have an adjustment for sensitivity.
PGM lights
(not visible unless in
programming mode)
Program switch
(hidden)
SYSTEM DETAILS