Filter
Top Products
LCX9000 Liquid-Cooled Drives User Manual
MN04005001E
For more information visit: www.EatonElectrical.com 4-11
January 2007
Table 4-2: Installing the Control Unit Mounting Box
1. If the keypad sits in its place on the
control unit, remove the keypad.
2. Connect the male end of the keypad
cable to the D-connector of the control
unit. Use RS-232 cable included in the
delivery.
3. Run the cable over the top of the box
and secure with plastic band on the
backside.
4. Grounding of keypad cable: Ground the
keypad cable in the mounting box frame
by fixing the branch cable with a screw
underneath the control unit.