Filter
Top Products
15
Cleaning the Milk Container
All of the milk container components can be washed in the top
rack of a dishwasher.
1. Turn the milk container lid clockwise and remove it.
2. Remove the milk spout and intake tube.
3. Remove the pointer by pulling it outward.
4. Wash all the components thoroughly with hot water and mild
detergent. Make sure there is no milk residue left inside the
holes or the groove on the fine end of the pointer.
5. Check that the intake tube and spout are not clogged with
milk residue.
6. Replace the pointer, milk spout, and intake tube.
7. Replace the milk container lid.
Vacation or Storage
If the coffee system will be unused for an extended period of
time, empty the coffee grounds container, drip tray and water
tank. Turn the coffee system off using the main On/Off switch and
unplug it before storage.
Switching Off the Coffee System
Each time the coffee system is put into standby mode, it
performs an automatic rinse that cannot be interrupted.
To turn off the coffee system, press the On/Standby button on
the front of the coffee system. “TURNING OFF Please wait...” will
display, and hot water will run off from the coffee spout.
The coffee system will automatically go into standby mode after
30 minutes. To change this duration, see “Auto-Off” in the
“Settings” section.
NOTE: If the coffee system will not be used for an extended
period of time, press the main On/Off button on the side of the
machine. Auto-Set will not work when the machine is turned off
by the main On/Off button.