Jenn-Air JDRP548 Cooktop User Manual


 
27
4. Use the buttons -5ºF (-1ºC) or +5ºF (+1ºC) to adjust the Probe
Temperature. The default temperature is 160ºF (71ºC). The
temperature must be between 130ºF (54ºC) and 185ºF (85ºC).
5. To change the oven temperature, touch the TEMPERATURE
tab to move to the Temperature screen. Use the slider to
enter a desired cooking temperature or touch the -5ºF (-1ºC)
or +5ºF (+1ºC) buttons. The temperature must be between
170ºF (77ºC) and 500ºF (260ºC).
6. To set a delayed start, touch Delay Start and set desired time.
See “Delay Start” section for additional information.
7. To remove probe temperature, but keep current mode and
cavity temperature, touch CANCEL PROBE button.
8. Touch START to begin cooking with the probe.
Delay Start
Delay Start allows the oven(s) to be set to turn on at a certain
time of day and cook for a set length of time.
Delay Start should not be used for food such as breads and
cakes because they may not bake properly.
Delay Start is available with any cycle that has a Delay Start
button.
To Set a Delay Start:
1. From any mode with the Delay Start button available, press
DELAY START.
2. Set time of day you would like the oven to start heating by
using the slider to enter a desired time or press the “-15min”
or “+15min” buttons. These buttons decrease or increase the
selected time and also move the slider.
3. Press SET DELAY.
Delay with Cook Timer:
1. If Delay with Cook Timer is desired, select Timer Not Set or
Cook Timer.
2. Program desired cook time, then touch DELAY START. The
difference between the start and end time should equal the
cook time.
3. (Optional) Select KEEP WARM ON to keep food warm after
cooking if desired.
4. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
5. Press SET DELAY.
Delay with Probe:
1. If Delay is chosen when the probe is in use, select Delay Start
when at the Probe Temp screen, then select when cooking
should begin. Because the probe controls the end time, the
end time will not be displayed.
2. Use the slider to enter a desired begin time or press the
“-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin and also move the slider.
3. The oven will automatically keep the food warm when the
probe reaches the target temperature.
4. Press SET DELAY.
Delay for Clean
1. If Delay for Clean is desired, select Delay Start after selecting
the Cleaning level. Select when cleaning should begin. The
oven will calculate the end time based on your cleaning level
choice.
2. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
3. The oven will cool for an additional hour after cleaning is
completed.
4. Press SET DELAY.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.