Filter
Top Products
Before You Call for Service
Oven will not self-clean.
0 Check to make sure controls are set properly.
• Check to make sure tbe cycle is not set for a delayed start. _ Calt the dealer from whom your appliance was pur-
• Check if door is closed, chased or call Maytag Appliances Sales Company,
Jenn:Air Customer Assistance at 1-800-688-1100.
or 1-423-472-3333 to locate an authorized service
Oven did not clean properly, company.
• Longer cleaning time may be needed.
• Excessive spillovers, especially sugary and or acid foods, 4_ Be sure to retain proof of purchase to verify war-
were not removed prior to the self-clean cycle, ranty Status. Refer to WARRANTY (next page) for
further information of owner's responsibilities for
warranty service.
Oven door will not unlock after self-clean cycle.
• Oven interior is still hot. Allow about one hour for the a • If the dealer or service company cannot resolve the
oventocoolafterthecompletionofaself-cleancycle.The pr0blem, write to Maytag Appliances Sales
door can be unlocked when the LOCK indicator word is Company, Attn! CAIR TM Center. EO. Box 2370,
Cleveland, TN 37320-2370. or Call1-800-688-1100
not displayed. Or 1-423-472-3333,
U.S. customers using TTY for deaf. hearing im-
Moisture condensation on oven window, paired or speech impaired, call 1-800-688-2080.
• This is normal when cooking food high in moisture.
NOTE:When writing or calling about a service
• Excessive moisture was used when cleaning the window, problem; please include the following information:
a. Your name, address _d telephone number:
Strong odor when oven is turned on. b, Model number and serial number:
• This is normal for a new range and will disappear after a c. Name and address of your dealer or servicer;
d. A e!ear description of the problem you are
few uses. Initiating a clean cycle will "bum off' the smells having:
more quickly, e, Proof of purchase (sales receipt).
• Excessive food soils on the oven bottom. Use a self-clean
cycle. • User's guides, service manuals and parts catalogs
are available from Maytag Appliances Sales Com-
"F" plus a number appears in display, pany, Jenn-Air Customer Assistance.
• This is called a fault code. If a fault code appears in the
display and beeps sound, press the Stop/Clear pad. If the
fault code and beeps continue, disconnect power to the
appliance and call an authorized servicer.