Filter
Top Products
Controls at a Glance 6
Setting the Clock
1. Press Clock pad. 4. At the end of the time set, the timer will beep and "End"
• The indicator word TIME will flash in the display, will appearin the display. To change the numberof timer
beeps and add reminder beeps, see page 7.
2. Pressthe appropriatenumberpadsuntilthe correct timeof
day appears in the display. To cancel:
When electrical power is supplied or after a power interrup- 1. Press and hold Timer pad for three seconds. The time of
tion, the last clock time, before power was interrupted, will day will reappear.
flash. OR
To recall the time of day when another time function is 2. Press the Timer pad and the "0" number pad. After a
showing, press the Clock pad. slight delay the time of day will reappear.
Clock time cannot be changed when the oven has been
NOTE: Pressing StopClear pad to cancel the timer will
programmed for clock controlled cooking, self-clean or
delayed self-clean, cancel ALL selected oven functions except the timer.
Setting the Timer Control Options
Use to set andthen signal the completion of atime period up Control Lockout Option
to 99 hours and 59 minutes.
The control touch pads can be locked to prevent unwanted
The timer can be used independently of any other oven
activity and can be set while another oven function is oper- use. They will not function when locked.
ating. The timer does not control the oven. If an oven function is currently being used, the controls
1. Press Timer pad. cannot be locked.
• The indicator word TIMER will flash and "0Hr:00" The current time of day will remain in the display when this
appears in the display, feature is activated.
2. Press the appropriate number pads until the desired num- Setting Control Lockout
bet of minutes or hours and minutes appear in the display.
1. Press and hold the Stop Time and the Stop/Clear pads at
Example: To set the Timer for5 minutes, press the Timer the same time for three seconds. The control will beep
pad and the number 5 pad. The control will begin when option is activated.
countdown after a four second delay. • The indicator word OFF will appear in the display for 15
seconds if any pad is pressed.
To Cancel: Press and hold the Stop Time and the Stop/
Clear pads at the same time for three seconds. The indicatoi
word OFF will disappear in the display.
Example: To set the Timer for 1 hour and 30 minutes,
press the Timer pad and the numbers 1,3,0 pads. The Cancel Clock Display Option
control will begin countdown after a four second delay.
If you prefer that the time of day not be displayed:
1. Press Clock and Stop/Clear pads at the same time ant
hold for three seconds.
2. Press Clock pad to briefly recall the time ofday, ifdesired
3. The last minute of the countdown will be displayed as To restore: Press the Clock and Stop/Clear pads at the sam_
seconds, time and hold for three seconds. The time of day will reappeaJ
in the display.