Filter
Top Products
Controls at a Glance
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Stop Time/Cook Time Setting the Timer
Use to program the oven to start and stop automatically. Use to set and then signal the completion of a time period up
L Press Bake or Convect Bake pad. Press the appropriate to 99 hours and 59 minutes.
number pads for desired temperature. The timer can be used independently of any other oven
2. Press Cook Time pad. Press the appropriate number pads activity and can be set while another oven function is operat-
toenter cooking time in hours and minutes, ing. The timer does not control the oven.
3. To delay the startofcooking, press Stop Time pad. Press
1. Press Timer pad.
the appropriate number pads to enter the time you want the
oven to stop. • The indicator word TIMER will flash and "0Hr:00"
See page 15-16 for additional information, appears in the display.
2. Press the appropriate number pads until the desired num-
ber of minutes or hours and minutes appear in the display.
Drying (select models)
Use to dry or dehydrate foods such as fruits, vegetables and Example: To set the Timer for 5 minutes, press theTimer
pad and the number 5 pad. The control will begin count-
herbs, down after a four second delay.
1. Press Drying pad.
2. Press Preset (0) pad for 140°F or the appropriate number
I_l . l_l _U
TIMER
pads for the drying temperature desired.
See page 16-17 for additional information.
Setting the Clock Example: To set the Timer for 1 hour and 30 minutes,
press the Timer pad and the numbers 1,3,0 pads. The
1. Press Clock pad. control will begin countdown after a four second delay.
• The indicator word TIME will flash in the display.
2. Press the appropriate number pads until the correct time of
day appears in the display.
When electrical power is supplied or after a power interrup-
tion, the last clock time, before power was interrupted, will
flash. 3. The last minute of the countdown will be displayed as
To recall the time of day when another time function is seconds.
showing, press the Clock pad. 4. At the end of the time set, the timer will beep and "End"
Clock time cannot be changed when the oven has been will appear in the display. To change the number of timer
programmed for clock controlled cooking, self-clean or beeps and add reminder beeps, see page 7.
delayed self-clean.
To cancel:
1. Press and hold Timer pad for three seconds. The time of
day will reappear.
OR
2. Press the Timer pad and the "0" number pad. After a
slight delay the time of day will reappear.
NOTE: Pressing Stop/Clear pad to cancel the timer will
cancel ALL selected oven functions except the timer.