Filter
Top Products
Controls at a Glance
• • • • • • • • • • • • • • • • • • • • • • • ¢ • • • • • • • • • • • • • • • •
Control Options
Control Lockout Option Clock Controlled Oven
Cooking Beep Options
The control touchpads can be locked to prevent unwanted
use. They will not function when locked. • Option 1 (default option): Four beeps at the end of
cooking, then, onebeep every30 seconds for the next five
If an oven function is currently being used, the controls minutes or until the Stop/Clear pad is pressed.
cannot be locked.
• Option 2: Four beeps at the end of cooking, then, one
The current time of day will remain in the display when this beep every minute for the next 12hours or until the Stop/
feature is activated. Clear pad is pressed.
Setting Control Lockout • Option 3: Four beeps at the end of cooking, then, no
other beeps.
1. Press and hold the Stop Time and the Stop/Clear pads at
the same time for three seconds. Setting Clock Controlled Oven Cooking Beeps
• The indicator word OFF will appear in the display for 15 1. Press Cook Time and Stop/Clear pads at the same time
seconds. OFF will reappear for 15 seconds if any pad is and hold for three seconds.
pressed. • A single beep will sound.
To Cancel: Press and hold the Stop Time and the Stop/ • Display will showthe indicator word COOK and the
Clear pads at the same time for three seconds. The indicator current option.
word OFF will disappear in the display. 2. Press the appropriate number pad (1, 2, or 3) to select the
option you wish. The current time of day will reappear in
Timer Beep Options the display after four seconds.
• Option 1: One long beep at the end of the timer operation,
then, one short beep every 30 seconds for the next five Cancel Clock Display Option
minutes or until the Stop/Clear pad is pressed.
• Option2" Onelongbeepattheendofthetimeroperation, If you prefer that the time of day not be displayed:
then, one short beep every minute for the next 12 hours or 1. Press Clock and Stop/Clear pads at the same time and
until the Stop/Clear pad is pressed, hold for three seconds.
• Option 3 (default option): One beep at the end of the 2. PressCloekpadtobrieflyrecallthetimeofday,ifdesired.
timer operation, then, no other beeps.
To restore: Press the Clock and Stop/Clear pads at the same
Setting the Timer Beeps time and hold forthree seconds. The time ofday will reappear
in the display.
1. Press the Timer and Stop/Clear pads atthe same time and
hold for three seconds.
• A single beep will sound.
• Display will show the indicator word TIMER
and the current option.
2. Press the appropriate number pad (l, 2, or 3) to select the
option you wish. The current time ofday will reappear in
the display after four seconds.